MINIMIZE YOUR POOL ENERGY USE

Written by Super User. Published on 18 May 2021. Hits: 2710

Swimming pools & spas can be large energy users, beaten only by hot water services and air conditioning when it

comes to consumption. Fortunately, there are some simple measures that you can employ to reduce energy

consumption and keep costs down.

Some energy providers offer incentives to use electricity out of peak times. Moving to shoulder or

off-peak tariff periods isn't limited to pool equipment either, running clothes dryers and dishwashers,

outside peak times can provide cost savings as well. Enquire about ‘Smart Meters’ as some energy

providers offer free upgrades, allowing you to take advantage of cheaper energy rates.

You may decide to locate the pool equipment away from the house or use a sound proofing cover to

minimise the noise, if you choose to run the equipment overnight to capitalise on cheaper energy.

The larger the pump, the more power it uses, so opt for the pump size that fits your requirements, but no

bigger. The E3 Energy Rating Labelling Program for pool pumps offers guidance on the most energy

efficient. Consider upgrading to a Multi-speed or Variable speed pump. They can offer a multitude of

functions, while providing large savings, up to $500 per year.

Running times should be matched with filtering and sanitisation requirements, with the system set for

optimal daily run times, multiple short cycles are better than one larger cycle.

Around 90% of heat loss in a pool occurs at the surface. Not only can a blanket protect the pool from leaf

litter & other debris, they can substantially extend the swimming season. In the case of a heated pool, a

well-fitting blanket can deliver an energy saving of up to 50%.

Even without pool heating (gas, electric or solar), the addition of a pool blanket can result in a 6-8 degree

temperature increase in a pool that has a sunny aspect.

It is important to have a regular maintenance program. Removal of leaf litter & other debris, cleaning

filter and general maintenance will prevent poor circulation and associated problems. If the equipment

has to work harder than necessary, it will draw more power and cost more to run.

Graham Parry

Wishart | Sales

P: (07) 3343 6654 QBCC: 1137 682

] E: This email address is being protected from spambots. You need JavaScript enabled to view it. W: www.jcpools.com.au